Disclaimer: This article was created in collaboration with deelan, who sponsored this content – an adaptive AI sales training and coaching platform combining AI roleplays and coaching, courses, assessments, and programmes. These partnerships support the blog, allowing me to continue providing free, valuable content. Everything I write is driven by my commitment to provide the highest educational value to my readers.
Quick answer
To conduct a sales training needs analysis (TNA), start with the business requirements, rather than a proposed training programme.
Establish what the organisation needs sellers to achieve, examine the relevant performance data or upcoming selling demands, and define the knowledge, skills, and judgement effective execution requires.
Next, assess what sellers can currently demonstrate, using evidence such as observed sales conversations, structured roleplays, and knowledge or judgement assessments. Compare the findings against the required standards, while considering the conditions in which sellers work.
The critical step is determining whether an observed shortcoming reflects a genuine capability gap that development could address.
For example, a seller who knows how to conduct effective discovery but is encouraged to rush into demos may need a change in management expectations rather than more training. By contrast, if a seller struggles to explore buyer needs during a realistic roleplay or simulated sales conversation, this provides stronger evidence of a capability gap that targeted practice and feedback could address.
Once development needs are validated, prioritise them according to their business relevance, severity, frequency, and feasibility. Recommend appropriate interventions, involve the relevant stakeholders, and establish baselines and a plan to reassess proficiency and field application.
The same approach can be used proactively, such as when preparing sellers for a new product launch, rather than waiting for performance problems to emerge.
If you want the full breakdown, the rest of this guide goes deeper.
Turn skill gaps into better sales performance
Introduction
I’ve seen this situation many times throughout my career. Discovery-to-opportunity conversion starts to fall, sales leadership looks at the numbers, and, before long, the conversation turns to getting the team some discovery training.
It’s a reasonable place to go to. If opportunities aren’t progressing beyond the initial conversation, you’d naturally want to examine the quality of discovery. The problem starts when we take that performance signal as immediate evidence that sellers need more training.
Think about a rep who moves into a demo without properly exploring the buyer’s business problem. You might listen to that conversation and conclude they need better discovery skills. And perhaps they do.
But what if that same rep knows how to conduct effective discovery and is simply being encouraged to get to the demo as quickly as possible? More training is unlikely to change much if those expectations remain the same.
This is what makes these decisions tricky. Sales performance depends on more than individual knowledge and skills gaps. Research by Churchill et al. (1985) and Verbeke et al. (2011) reinforces this, showing how motivation, role-related factors, and the wider selling environment also influence employee performance and end outcomes.
So before deciding what training to deliver, we need to understand enough about the performance problem to establish whether capability is actually part of it.
And if it is, there’s another question to answer: what specifically do sellers need to learn or become better at, and who needs that development?
That’s the more focused purpose of a sales training needs analysis, which uses evidence about business requirements, current capabilities, and how those capabilities are applied to identify genuine development needs, rather than treating every performance problem as a reason for comprehensive training.
In this guide, I’ll walk through how to conduct that analysis in practice, prioritise the needs you uncover, and decide what kind of development support makes sense.
What is a sales training needs analysis?
A sales training needs analysis (TNA) is a structured process for identifying the capabilities that sellers need to develop to meet specific business and role requirements.
It compares those requirements with evidence of what sellers can currently demonstrate, determines which identified skill gaps can reasonably be addressed through development, and prioritises the needs worth acting on.
By capability, I mean the knowledge, skills, and judgement sellers need to perform effectively in their roles.
For example, to conduct discovery effectively, a rep needs to understand the structure and key principles of a good discovery conversation, have the questioning and active listening skills to explore the buyer’s situation, and use their judgement to know when to probe deeper, adapt their approach, or move the conversation forward.
In practice, a TNA involves establishing three things:
- Required capability: What sellers need to know and be able to do in their role.
- Current capability: What the available evidence tells us they can demonstrate today.
- Development need: Which gaps matter enough to address, and what combination of learning, practice, coaching, and reinforcement would help.
A training needs assessment doesn’t necessarily start with a performance problem.
You might conduct one because conversion rates are falling and you need to understand whether sellers lack a particular capability. But you might also be preparing to launch a new product, enter a different market, or introduce a more complex sales methodology.
In those situations, the focus should be on identifying what sellers will need to develop before they’re expected to perform in the new environment.
Sales training needs analysis vs performance analysis vs skills assessment
To understand where a sales TNA fits even better, it’s worth looking at two closely related activities: sales performance analysis and sales skills assessment.
Let’s go back to the discovery example.
If discovery-to-opportunity conversion is declining, the first question is why. You’d want to understand where opportunities are stalling, what’s happening in customer conversations, and whether other factors, such as sales processes or management expectations, might be contributing to the problem.
This is the purpose of sales performance analysis: investigating the reasons behind a performance gap. Its scope is broader than training because the causes of poor results aren’t necessarily related to seller capability.
Now, suppose that investigation raises concerns about how reps are conducting discovery. We’d need to establish whether they actually have the capabilities required to do it effectively.
A sales skills assessment helps us answer that question by evaluating sellers against defined capability standards, using evidence such as observed sales calls, structured roleplays, or other practical assessments. This gives us a clearer picture of what sellers can demonstrate and where their capabilities may fall short.
A sales training needs analysis brings together the findings from the performance analysis, including the factors that may be contributing to poor results, with evidence from skills assessments showing what sellers can currently demonstrate.
It then considers these findings against business and role requirements to determine which capabilities need developing, who needs that development, and what form of training or skills development, if any, would be appropriate.

The three activities therefore have distinct purposes, even though they often inform one another.
| Sales performance analysis | Sales training needs analysis | Sales skills assessment | |
|---|---|---|---|
| Main question | Why are results below expectations? | What needs developing, and for whom? | What can sellers currently demonstrate? |
| Focus | Performance outcomes and their possible causes | Required capabilities, development gaps, and application conditions | Knowledge, skills, judgement, and proficiency |
| Output | Performance diagnosis and possible improvement actions | Prioritised development needs and recommendations | Evidence of strengths and capability gaps |
What established approaches tell us about sales training needs analysis
The need to connect business requirements, role demands, and individual capability has a long history in training needs analysis.
In their foundational book, Training in Business and Industry (1961), McGehee and Thayer distinguished between three levels of analysis: organisational, task, and person.
Applied to sales, these three levels help us connect what the business needs to achieve with what sellers must be able to do, and where further development may be required:
- Organisational analysis examines the business’s goals, priorities, and wider context to understand what the sales team needs to be prepared for.
- Task analysis identifies the activities sellers need to perform in their roles and the capabilities required to carry them out effectively.
- Person analysis compares sellers’ current capabilities with what their roles require, helping identify who may need development and in which areas.
For example, if a business is entering a new market, we’d need to understand what that move means for the sales team, identify the capabilities required to sell effectively in that market, and assess how prepared individual sellers are.
This helps us focus on capabilities that matter in a specific business context, rather than assessing sales skills in isolation.
Even once we’ve established what sellers need to be able to do and assessed their current capabilities, there’s still an important question to answer: would further development actually help?
Rossett’s work on training needs assessment emphasised looking at the reasons behind gaps between current and desired performance.
Similarly, Mager and Pipe’s approach to performance analysis and Gilbert’s work on the factors that influence performance remind us that what people know and can do is only part of the picture. Their performance is also influenced by the conditions in which they work.
A seller might already have the skills to conduct effective discovery but be working under expectations that encourage them to move to a demo too quickly. They could also lack the feedback, resources, or opportunities needed to apply what they’ve learnt.
In these situations, recommending more training without understanding what’s influencing their behaviour is unlikely to solve the problem.
That’s why a sales TNA also needs to consider the factors that affect how sellers apply their capabilities. Some gaps may require learning or practice, while others may be better addressed through coaching, reinforcement, or changes outside the remit of training altogether.
Interestingly, this connection between individual development needs and the wider business remains an area of concern in the research. A 2025 systematic review of training needs analysis highlighted how much of the field has focused on individuals, with insufficient attention to organisational strategy and context.
For sales teams, this reinforces the importance of considering the wider picture before making development recommendations. Otherwise, we risk investing in training that addresses a perceived skills gap while leaving the factors affecting performance untouched.

How to conduct a sales training needs analysis: a 7-step framework
Understanding the difference between a performance gap and a development need is important. I think applying that distinction when you’re under pressure to improve results is where things become more challenging.
You might have a sales leader asking for a training initiative, a set of metrics pointing to a problem, and several possible explanations for what’s happening. Where do you start, and how do you get from that initial concern to a decision you can confidently act on?
I find it helpful to approach a sales TNA as a series of connected decisions. The seven-step framework below provides a practical way to work through them, from understanding the business requirements and examining current capabilities to establishing whether development is needed, deciding what support makes sense, and planning reassessment where appropriate.
Importantly, the analysis won’t always lead to a development recommendation. You might find that sellers already have the required capabilities, that other factors are affecting how they apply them, or that you need more evidence before reaching a conclusion.

That doesn’t mean every training request needs to become a lengthy investigation. The depth of the analysis should depend on the scope and complexity of the situation.
What’s important is gathering enough evidence to understand which capabilities sellers need, what they can currently demonstrate, and where further development could make a meaningful difference.
Step 1: Establish the business context
Before looking at sales skills, get clear on what the business is trying to achieve, why the analysis is necessary, and how seller performance relates to that objective.
Training requests often arrive with a solution already attached. A sales leader might say the team needs better discovery training because fewer initial conversations are turning into qualified opportunities.
That’s a useful starting point, but I’d want to understand the business concern behind the request.
Perhaps the company is aiming to grow new-customer revenue in the mid-market segment, and leadership is worried that declining conversion will leave the team without enough qualified pipeline to support that goal.
The business objective is now clearer. After all, increasing discovery-to-opportunity conversion wouldn’t necessarily help if it simply meant progressing more prospects who were unlikely to buy in the first place.
I’d start by speaking with the person requesting the analysis, alongside frontline sales managers and other stakeholders who understand the relevant business priorities and selling environment. Depending on the situation, that might include RevOps, product, or sales enablement.
I’d also clarify whose support we’ll need to carry out the analysis, whether that’s providing access to relevant data, making time for assessments, or helping review the findings and recommendations.
There are three areas I’d want to clarify:
- The business objective and reason for the analysis: What is the business trying to achieve, and what performance concern, risk, or upcoming change has prompted the request? How does that concern or change relate to the business objective?
- The initial scope: Which sales teams, roles, or selling situations does the request concern? This gives us a starting point for the analysis, which we’ll refine as we examine the evidence.
- The selling context: What should we understand about the customers, market, sales process, and conditions in which sellers operate? Have there been relevant changes in lead sources, buyer expectations, qualification criteria, or management direction?
Of course, an existing performance problem isn’t the only reason to conduct a TNA.
Imagine the business is launching a new product into a market it hasn’t previously served, with the objective of generating new-customer revenue. Sellers may need to engage more senior stakeholders and navigate unfamiliar buying situations.
There’s no performance decline to investigate yet. However, the upcoming change gives us a reason to examine whether the sales team has the capabilities required to support the launch.
We don’t know whether any capability gaps exist at this stage.
By the end of Step 1, you should be able to describe the business objective, the concern or change prompting the analysis, and the initial scope and context.
For our discovery example, that might be:
The business aims to grow mid-market new-customer revenue. Sales leadership is concerned that declining discovery-to-opportunity conversion could limit the qualified pipeline needed to support that goal. The analysis will initially focus on mid-market account executives to investigate whether seller capability is contributing to the concern and whether development could help.
We now know why the analysis matters and where to focus it initially, without assuming that discovery training is the answer.

Turn skill gaps into better sales performance
Step 2: Examine performance patterns and future selling demands
Having established the business objective, the initial scope, and the context behind the request, we can turn to the evidence.
The aim now is to understand what the performance data actually tells us, how significant the patterns are, and what might be contributing to them.
In our discovery example, sales leadership is concerned that declining discovery-to-opportunity conversion could limit the qualified pipeline needed to grow mid-market revenue.
I’d start by examining the CRM and sales performance data to verify the trend, understand its impact, and see where the differences appear.
Is the decline concentrated among particular teams, customer segments, or lead sources? Are sellers receiving a different mix of prospects? Have qualification criteria or CRM stage definitions changed?
I’d also look beyond the initial conversion rate. How many qualified opportunities are being created, and what happens to them afterwards? Are they progressing through the pipeline, or frequently stalling at later stages?
A lower conversion rate doesn’t necessarily mean sellers are performing worse. For example, stricter qualification might reduce the number of opportunities created while improving the proportion that eventually turn into customers.
We need to interpret these patterns in relation to the business objective, rather than assuming that every decline in a performance metric represents a problem.
The evidence you can draw on will depend partly on your organisation’s technology and analytics maturity, as well as the quality of the data being captured.
Depending on the systems and information available, useful sources include:
- CRM and pipeline data: Stage conversion rates, opportunity ageing, qualification information, and differences across teams, segments, and lead sources can help establish where results are changing.
- Win-loss analysis and customer feedback: Loss reasons, buyer feedback, and post-deal interviews may highlight recurring concerns, such as poorly understood business requirements, unsuitable opportunities, or expectations that weren’t addressed during the sales process.
- Sales conversation recordings and analysis: Conversation intelligence tools can help identify patterns across interactions, including when sellers introduce demos, how they explore buyer challenges, which topics receive attention, and whether an appropriate next step is established.
- Frontline manager and seller feedback: Deal reviews and structured discussions can provide context around customer behaviour, management expectations, lead quality, and changes in the selling environment that might not be visible in reporting.
Suppose our analysis suggests that, in a number of the conversations we’re investigating, sellers introduce demos after relatively little discussion of the buyers’ business challenges.
We’ve identified a more specific pattern than the original conversion metric. But what explains it?
Sellers might struggle to explore buyer needs effectively. They might have the necessary skills but choose to follow management expectations to reach the demo quickly. Perhaps some buyers have already completed their research and are asking to see the product.
I’d also want to look at the conditions in which sellers are working:
- Are expectations about discovery clear and consistent?
- Are managers or performance incentives encouraging sellers to prioritise demo volume?
- Could workload, available information, or the sales process itself be influencing how they approach these conversations?
Rather than leaving these as a list of possibilities, I’d use them to guide a more focused examination of the evidence.
For example, we could review whether demos are typically introduced at the seller’s initiative or in response to buyer requests. We could look at whether the pattern is concentrated among particular teams or managers, and examine what sellers are being encouraged to prioritise. Comparing conversations that progress into suitable opportunities with those that don’t may also provide useful context.
The intention here is to narrow down the explanations that deserve further investigation and identify what evidence we’ll need to test them.
In our example, we might find that early demos are particularly common within one team, where managers place considerable emphasis on getting prospects to a demo. That would make management expectations an important factor to investigate alongside seller capability.
Or, the pattern might appear across teams and customer types, with little evidence of a common environmental influence. We’d then have good reason to examine sellers’ discovery capabilities more closely, while remaining open to other explanations.
At this point, I’d also consider whether the evidence justifies continuing into a capability assessment.
Sometimes, there may be enough signs to stop the TNA process. For example, if the apparent conversion decline is explained by a change to CRM stage definitions, and the wider evidence gives us no reason to suspect a capability issue, there’s little value in assessing sellers’ discovery skills. We’d document the finding and refer the reporting issue to RevOps.
Where seller capability remains a plausible contributing factor, we’d continue by defining what effective execution requires in the relevant selling situations and assessing what sellers can currently demonstrate against those expectations (Steps 3 and 4).
We’d then determine whether the findings justify development or point towards other barriers that need addressing (Step 5).
In our discovery example, that means examining whether sellers have the knowledge, skills, and judgement required to conduct effective discovery, while keeping management expectations and buyer behaviour in view as possible influences on execution.
For a proactive TNA, we’d examine the evidence from a different angle.
Take the new-product launch from Step 1. Rather than investigating a decline in existing performance, we’d look at how the selling demands are expected to change.
Perhaps account executives will need to engage more senior stakeholders, navigate larger buying groups, or discuss business outcomes they haven’t previously been expected to address.
Information about the new market, expected buyers, and intended sales approach can help us understand those demands. Existing role information and sellers’ experience with comparable situations may also be useful.
We’d also want to understand any changes to the selling environment that could affect execution, such as unfamiliar sales processes, limited product information, or new expectations from management. These may create challenges independently of whether sellers have the required capabilities.
By the end of Step 2, we should have an evidence-informed understanding of the performance patterns or upcoming selling demands, together with the possible explanations and conditions that warrant further investigation.
For our discovery example, we now have a specific behaviour to examine and several plausible reasons why it might be occurring. What we don’t yet have is a basis for determining whether sellers are executing discovery effectively or possess the capabilities the role requires.
To make that assessment, we first need to define what effective execution should look like in the relevant selling situations. That’s the focus of Step 3.

Step 3: Define the capabilities required for effective execution
The next task is to translate the business and selling requirements we’ve identified into a clear description of what sellers need to know, be able to do, and exercise judgement about to perform effectively.
I’d start with the roles and selling situations that matter to the analysis. What does effective execution require in those situations? What should a seller be able to demonstrate, and which decisions do they need to make well?
The answers should be specific enough to provide a meaningful basis for assessment, while allowing for differences in customers, buying situations, and individual approaches.
Let’s apply that to our discovery example.
Effective discovery won’t look exactly the same in every sales conversation.
Imagine a buyer who has already researched the product, understands the problem they’re trying to solve, and wants to see how a particular feature works. Introducing a demo early might be entirely appropriate.
Now consider a buyer who’s interested in the product but hasn’t clearly articulated the business problem behind that interest. Moving straight into a demonstration could mean missing information needed to determine whether there’s a genuine opportunity or what to emphasise in the demo itself.
The distinction is important because we want to define effective execution without prescribing the same sequence of actions for every conversation.
We also need to keep the commercial objective in mind. For our mid-market account executives, the goal isn’t simply to increase discovery-to-opportunity conversion. It’s to identify suitable prospects, understand their needs, and progress opportunities when there’s a sound reason to do so.
With that in mind, we might describe effective discovery as follows:
During an initial discovery conversation, establish the buyer’s business problem, explore its consequences, understand the relevant buying context, and determine whether the prospect represents a suitable opportunity. Agree an appropriate next step, using judgement about when a solution discussion is warranted.
From that description, we can identify the knowledge, skills, and judgement sellers need to demonstrate.
They need to understand the principles of effective discovery, including what information matters when qualifying an opportunity. They need the questioning and active listening skills to explore the buyer’s situation, follow up on what they hear, and uncover relevant business challenges.
They also need the judgement to recognise when something deserves further exploration, when to adapt their approach, and whether there’s enough understanding to move towards a solution discussion. Sometimes, effective execution will mean recognising that an opportunity shouldn’t progress.
Of course, the standard needs to reflect the role and selling context.
An SDR conducting initial qualification and an enterprise account executive navigating a complex buying group both need discovery capability. However, the expected depth of exploration, stakeholder understanding, and judgement will differ.
To define appropriate standards, I’d draw on established sales methodologies, competency frameworks, buyer expectations, and input from experienced sales leaders.
But I’d also examine what effective execution looks like within our own organisation. Where sufficient call recordings and reliable outcome data are available, analysing conversations at scale can help identify behaviours associated with stronger results, including patterns demonstrated by top performers.
Of course, we’d need to interpret those findings appropriately. Just because a behaviour is common among successful sellers doesn’t mean it caused their success, or that it will work in every selling situation. The idea is to combine established practices with what we can learn from our own sales data, rather than defining expectations based on assumptions alone.
There’s no need to build an entirely new competency framework for every TNA. We need to identify the capabilities relevant to the business requirements we’re examining and describe them specifically enough that we can assess whether sellers demonstrate them.
For a proactive TNA, the same approach applies.
In our new-product launch example, we’d use the anticipated selling demands to establish what effective execution will require. If account executives need to engage senior stakeholders in an unfamiliar market, we’d define the relevant knowledge, skills, and judgement before examining whether they’re already equipped to handle those conversations.
One thing I’d be careful about is confusing easily measured behaviours with standards of effective execution.
For example, asking five discovery questions or waiting a certain number of minutes before introducing a demo might be easy to track. Neither necessarily tells us whether the seller understood the buyer’s situation or made an appropriate decision.
At this stage, we’re defining what sellers need to be capable of doing, not determining whether they can already do it.
By the end of Step 3, we should have a set of role-relevant capabilities and observable expectations that can serve as the basis for assessing current proficiency.

Step 4: Assess current capability and its application
Having defined what effective execution requires, we can now examine what sellers can actually demonstrate against those expectations.
We’ve reached this stage because the earlier analysis gave us a credible reason to investigate seller capability further. We now have a standard against which to assess it.
For our discovery example, I’d start by reviewing relevant sales conversations, focusing on the teams, sellers, and selling situations identified in Step 2.
This time, we’re examining execution against the capabilities defined in Step 3.
Are sellers asking relevant questions and following up on what buyers tell them? Can they explore business challenges in sufficient depth, establish whether an opportunity is worth pursuing, and make appropriate decisions about how to progress the conversation?
I’d look at a reasonable selection of conversations, including examples where discovery appears to have been handled effectively. Comparing execution across different situations can help us understand whether sellers demonstrate the required capabilities consistently, rather than drawing conclusions from an isolated interaction.
The context of each conversation matters when interpreting what we observe.
For example, a seller who doesn’t explore business impact during a brief scheduling call hasn’t necessarily failed to demonstrate discovery capability. The same omission during a substantive conversation about the buyer’s business challenges may be much more revealing.
We also need to consider whether the seller had a reasonable opportunity to demonstrate the capability and whether their approach was appropriate for that particular buyer.
The important question now is whether the evidence gives us a sufficiently reliable picture of sellers’ proficiency against the standards we’ve defined.
If observations across relevant discovery conversations consistently show that a seller struggles to explore business challenges, ask meaningful follow-up questions, or qualify opportunities appropriately, we have evidence of where their execution falls short.
Depending on the quality and consistency of those observations, we may already have enough information to assess their proficiency in those areas.
Where the evidence is less conclusive, additional assessment can help.
For instance, a structured roleplay might give a seller the opportunity to demonstrate their questioning, listening, and qualification skills in a realistic scenario. A knowledge or judgement assessment could help us examine whether they understand the principles involved and can reason through relevant decisions.
Different methods provide different kinds of evidence:
| Assessment method | What it helps establish | Important limitation |
|---|---|---|
| Observed calls or meetings | How sellers apply the required knowledge, skills, and judgement in real customer interactions, including how they adapt to different buying situations. | Execution may be influenced by buyer behaviour, management expectations, or other working conditions. Observed shortcomings can indicate a capability gap, but need to be interpreted in context. |
| Structured roleplays or simulations | Whether sellers can demonstrate specific capabilities in a realistic, controlled scenario where they have a clear opportunity to apply them. | Performance depends partly on how realistic and well-designed the scenario is. A seller may perform well in a simulation but struggle with the complexity, pressure, or unpredictability of actual customer conversations. |
| Knowledge or judgement assessments | Whether sellers understand relevant concepts, recognise important information, and can reason through decisions they may encounter in their role. | Knowing the right approach, or selecting an appropriate response in a hypothetical situation, doesn’t establish that sellers can execute it effectively in a live conversation. |
| Seller and manager discussions | How sellers approach particular situations, the reasoning behind their decisions, and any expectations or constraints that may help explain observed execution. | Self-assessments and manager perceptions can be incomplete or biased. Discussions provide useful context but should be considered alongside evidence of what sellers actually demonstrate. |
Turn skill gaps into better sales performance
We don’t need to use every method for every seller. The choice should depend on what we need to establish and how convincing the existing evidence is.
Where direct observation provides a reliable assessment, further testing may add little value. Where findings are mixed, or where the decision has significant consequences, I’d look for corroborating evidence.
I’ve explored these approaches in more detail in my guide to sales skills assessment.
There’s one aspect worth keeping in mind as we interpret the results.
What sellers can demonstrate in an assessment and how they execute in the field may not always be the same.
A seller might demonstrate effective discovery in a realistic simulation but perform less consistently in customer conversations. Another might struggle to demonstrate the required skills across both settings.
Those are meaningfully different findings. The first suggests that the seller can demonstrate the capability under certain conditions, although we may need to understand why that doesn’t consistently translate into field execution. The second provides stronger evidence of a potential proficiency gap.
At this stage, we can identify and document those differences without reopening the broader performance investigation. We should, however, keep the contextual factors identified in Step 2 in view when judging how much confidence to place in our findings.
For a proactive TNA, the principle is similar.
Before launching a new product into an unfamiliar market, for example, we might use realistic scenarios to assess whether account executives can engage senior stakeholders, explore unfamiliar business challenges, and make appropriate decisions in the buying situations they’ll soon encounter.
Essentially, we’re assessing current proficiency against capabilities the business will require.
By the end of Step 4, we should have an evidence-based assessment of sellers’ proficiency against the required standards, including specific areas where capabilities appear to fall short and any meaningful differences between demonstrated capability and execution in the field.
We can now bring those findings together with what we learnt about the selling environment in Step 2 to determine whether development is warranted, what it should address, and whether other changes are also needed.
That’s the focus of Step 5.

Step 5: Determine whether the evidence establishes a development need
We now have two important pieces of information: what effective execution requires and what sellers can currently demonstrate.
The task is to interpret those findings, alongside the contextual evidence gathered in Step 2, and decide whether they establish a genuine development need.
I’d start by looking at the specific areas where proficiency falls short of the standards we’ve defined.
In our discovery example, perhaps the assessment shows that some account executives consistently struggle to explore the consequences of a buyer’s business problem or ask meaningful follow-up questions, even when the conversation provides a clear opportunity.
If that finding is supported by sufficiently reliable evidence, we have a credible basis for identifying a capability gap. We can also be specific about what needs developing, rather than concluding that the entire team needs general discovery training.
Other findings require a different interpretation.
Suppose a seller demonstrates effective discovery in a structured assessment but applies those skills inconsistently in customer conversations. Such a difference may indicate a need for further practice, feedback, or reinforcement, particularly if they struggle to adapt their approach to more demanding situations.
However, we’d also consider the working conditions identified earlier. If management expectations or other constraints are discouraging effective execution, additional development alone may do little to address the problem.
Ultimately, you should determine which shortcomings development can reasonably address, while recognising any conditions that also need attention.
The evidence will generally point towards one or more of the following conclusions:
| Finding | What it suggests | Implication for the TNA |
|---|---|---|
| Sellers cannot reliably demonstrate required knowledge, skills, or judgement, despite appropriate opportunities to do so | A capability gap is supported by the assessment evidence | Document the specific development need, who it affects, and the evidence supporting it |
| Sellers demonstrate a capability in some situations but struggle to apply it in others | The issue may involve adapting or transferring capability, inconsistent practice, or conditions affecting application | Establish whether further development support is warranted, while accounting for relevant contextual factors |
| Sellers demonstrate the required capability, but established expectations, processes, or incentives prevent or discourage its effective use | The evidence points primarily towards an application barrier rather than a material capability gap | Record a no-development finding for that issue and refer the barrier to the appropriate function |
| Evidence remains insufficient or contradictory | We cannot confidently establish whether a development need exists | Identify the specific uncertainty and gather further evidence before making a recommendation |
These conclusions aren’t necessarily mutually exclusive.
Within the same sales team, some sellers may have genuine discovery skill gaps, while others demonstrate adequate proficiency but face conditions that make effective execution less likely.
A training needs analysis should be able to distinguish between those groups. It should also recognise when both capability development and changes to the working environment are necessary.
Equally, finding no material development need is a valid outcome.
If the assessment shows that sellers have the required capabilities and the remaining evidence points towards management expectations as the main source of the execution problem, we should document that conclusion rather than recommend training simply because it was originally requested.
For a proactive TNA, we’re making a similar determination, but against the capabilities sellers will need to meet upcoming business requirements.
Consider our new-product launch example. We’ve established that account executives will need to engage senior stakeholders and discuss business outcomes in an unfamiliar market. If the assessment shows that sellers cannot yet demonstrate some of those capabilities to the required standard, we have evidence of a development need to address before the launch.
If they can already demonstrate the required capabilities, however, we shouldn’t assume they need development simply because the product or market is new. A formal training programme may not be needed, and concise product briefings, practical job aids, or access to relevant product expertise might provide sufficient support.
The TNA should capture those specific knowledge and support requirements without treating the launch itself as evidence of a broader skills gap.
By the end of Step 5, we should have a defensible record of the development needs established by the evidence, the sellers or groups affected, any non-training barriers that require attention, and questions that remain unresolved.
With the development needs established, Step 6 is where we’ll decide which ones to prioritise and what kind of support is most appropriate.

Step 6: Prioritise development needs and recommend appropriate responses
Once we’ve established which capabilities need developing, the next step is where to focus our efforts and what kind of support is most likely to address each need.
We may have identified several development needs across different roles or teams. Addressing all of them at once isn’t necessarily practical, or even desirable.
I’d prioritise them by considering five factors:
- Business relevance: How important is the capability to the commercial objective or upcoming selling requirement identified in Step 1?
- Frequency and exposure: How often do sellers encounter situations where the capability matters, and how many people are affected?
- Gap severity: How significant is the difference between current proficiency and the required standard?
- Evidence confidence: How consistently does the assessment evidence support the identified need? Where confidence is limited, further validation may be more appropriate than immediate investment.
- Development feasibility: Can the capability realistically be developed and applied within the available time, resources, and working conditions?
There is no need to turn those factors into an arbitrary scoring formula; you should use them to support a reasoned discussion about which needs deserve attention first, particularly when resources are limited.
I’d involve the relevant sales leaders and managers in those decisions, especially where recommendations will require their time, resources, or changes to existing practices. Their involvement can help establish what’s feasible and secure support for the proposed response.
Once priorities are clear, we need to match the development response to the nature and extent of the gap.
Different needs call for different approaches:
| Nature of the development need | Potential response |
|---|---|
| Sellers need specific product, market, or methodology knowledge but already possess the skills to apply it | Focused learning, product briefings, reference materials, or job aids, depending on the complexity of the information and how sellers will use it |
| Sellers understand what effective execution requires but struggle with a particular skill | Targeted skills training involving demonstration, structured practice, feedback, and opportunities to apply what they’ve learnt |
| Sellers have substantial gaps in one complex capability or several interconnected areas of knowledge, skills, and judgement | A structured sales training programme that develops the required capabilities progressively, combining learning, realistic practice, feedback, field application, and reinforcement |
| Sellers can demonstrate a capability but need development support to apply it more consistently in customer conversations | Field coaching, observation, feedback, and reinforcement, alongside attention to conditions affecting application |
| Managers lack the capabilities to assess, coach, or reinforce the required seller behaviours | Targeted manager development, potentially including coaching skills training, practical exercises, and calibration around performance expectations |
Turn skill gaps into better sales performance
Consider our discovery example.
If some account executives understand discovery principles but struggle to explore business impact effectively, targeted practice and feedback may be sufficient.
However, if the assessment reveals more substantial gaps across questioning, listening, qualification, and the judgement required to adapt discovery to different buyers, a structured training programme may be more appropriate.
That programme could combine knowledge development, realistic practice, feedback, and ongoing coaching.
Adaptive AI training platforms such as deelan can support this by helping teams turn existing sales playbooks, product information, and sales-call material into tailored learning experiences, including courses, realistic AI roleplays, and assessments. You can also try free sales assessments through the deelan Academy.
In our discovery example, that could mean creating opportunities for sellers to practise exploring business impact, responding to different buyer situations, and making appropriate qualification decisions. The learning activities could then be tailored to the capabilities each seller needs to develop, rather than putting everyone through the same programme.
Of course, the TNA should determine which capabilities need developing and what kind of intervention is appropriate. The platform can support the resulting development programme, but it shouldn’t dictate the diagnosis.
If you’re considering a broader intervention, these sales training programme examples provide useful reference points.
We should also account for any non-training dependencies identified in Step 5.
For example, if management expectations are encouraging sellers to introduce demos prematurely, those expectations may need to change alongside any discovery skills development. We’d document that dependency and refer it to the appropriate owner.
Of course, if the analysis hasn’t established any development needs, there’s no reason to recommend training. The appropriate outcome is a documented conclusion and any relevant non-training referrals.
By the end of Step 6, we should have prioritised development needs, identified who requires support, recommended appropriate development responses, and documented any conditions that could affect their application.
With those recommendations established, Step 7 is where we’ll define the baseline and plan how to reassess capability and its application over time.

Step 7: Establish baselines and plan reassessment
Before acting on the development recommendations, we need to establish how we’ll determine whether the identified needs have been addressed.
Much of the starting evidence should already be available from the earlier stages of the TNA. We’ve examined performance patterns, defined the required capabilities, and assessed what sellers can currently demonstrate.
The task now is to document the relevant baselines and decide what evidence we’ll collect again after development has taken place.
I’d consider three complementary perspectives:
- Capability: Can sellers demonstrate the required knowledge, skills, and judgement to the expected standard? In our discovery example, this might involve reassessing their ability to explore business impact and make appropriate qualification decisions in realistic scenarios.
- Application: Are sellers using those capabilities effectively in relevant customer conversations? We’d want to examine how they handle discovery in practice, while allowing sufficient time and opportunities for them to apply what they’ve learnt.
- Sales outcomes: Are the commercial indicators associated with the original business objective changing? For example, we might monitor discovery-to-opportunity conversion alongside the quality and subsequent progression of the opportunities created.
These perspectives help us understand different aspects of development effectiveness, but they shouldn’t be treated as interchangeable measures.
A seller might demonstrate stronger discovery skills in an assessment without consistently applying them in customer conversations. Equally, field execution may improve before any meaningful change appears in pipeline results.
And even if conversion improves, we can’t automatically attribute that improvement to training. Lead quality, management expectations, qualification criteria, and other factors may also have changed.
For each recommended development intervention, I’d document:
- The capabilities and aspects of field execution to reassess, together with their starting levels.
- The evidence and assessment methods we’ll use to make a meaningful comparison.
- When reassessment should take place, considering the nature of the capability and realistic opportunities to apply it.
- Who will review the findings and what would prompt further development, reinforcement, or reconsideration of the original diagnosis.
You should aim to make the eventual reassessment useful for deciding what to do next. If proficiency improves but application remains inconsistent, for example, the findings may point towards a need for additional coaching or changes to the conditions affecting execution.
I’ve explored the wider measurement process in my guides to sales training evaluation and sales training metrics.
What’s important to recognise here is that the TNA establishes the baseline and reassessment plan, while delivering development, supporting its application, and evaluating the results happen afterwards (steps that are beyond the scope of this article).
If the analysis hasn’t identified a development need, there’s no training reassessment to plan. We’d simply document the conclusion and any appropriate follow-up with the owners of non-training issues.
By the end of Step 7, we should have a documented baseline and a practical plan for revisiting the development needs we’ve identified.
And that brings us back to the wider purpose of the process. Once development has taken place, the evidence gathered through reassessment can inform future training needs analyses. Some gaps may have been addressed, others may require further attention, and changes in the business may introduce new capability requirements.
In that sense, the TNA provides a starting point for development decisions and a basis for revisiting them as new evidence becomes available.

From periodic TNA to a continuous evidence loop
So far, we’ve approached sales training needs analysis as a structured, seven-step process, starting with a business need and working towards validated development recommendations and a plan for reassessment.
There are good reasons to approach it this way.
A significant change in the business, such as entering a new market, introducing a different sales methodology, or launching a more complex product, may require us to reassess what sellers need to know and be able to do.
Equally, an emerging performance problem might prompt an investigation into whether existing capabilities are sufficient, whether sellers are applying them effectively, or whether something else is affecting execution.
In both situations, a structured TNA helps us move from an initial concern to an evidence-based decision about development.
But does every training need have to be identified through a separate, start-to-finish analysis?
Not necessarily.
At an organisational level, a more continuous approach becomes possible when we have clearly defined capability expectations for different sales roles, including what effective execution looks like and how it can be assessed.
These expectations might already exist within a sales competency framework, or be developed and refined as business requirements evolve. Individual TNAs can contribute to them, particularly when investigating specific areas of capability, but they don’t necessarily establish the standards for the entire organisation.
With that foundation in place, we can use information gathered through everyday sales activities to identify emerging development needs and revisit existing ones, rather than waiting for the next formal review or a significant performance problem.
This doesn’t mean repeating all seven steps every week. It means making the underlying diagnostic process part of how we monitor and support sales capability over time.
How a continuous approach could work
The starting point is to translate role-specific expectations into assessment criteria that can be applied consistently over time.
For example, if we’ve defined what effective discovery looks like, we can use those expectations to guide manager observations, assess recorded sales conversations, and evaluate sellers through structured exercises or simulations.
Technology can make much of this information easier to collect, organise, and analyse. Conversation intelligence tools can examine customer interactions against defined criteria, while digital assessments can help us evaluate proficiency more frequently.
Over time, this allows us to build a more current picture of sales capabilities across individuals and teams, with potential issues becoming visible much sooner.
We might notice, for instance, that several sellers are consistently struggling to explore business impact during discovery, or that proficiency in a particular capability appears to be declining.
Those findings can trigger a more targeted investigation. We’d still need to establish whether the issue reflects a genuine capability gap and whether training is the appropriate response. As we’ve discussed throughout this article, observing ineffective execution doesn’t automatically establish a development need.
Once a need has been validated, technology can also help us respond more quickly.
Adaptive AI training platforms such as deelan can support this process by connecting capability assessments with personalised learning, realistic AI roleplay practice, and subsequent reassessment.
Rather than assigning the same training to everyone, teams can provide development activities based on the specific capabilities sellers need to strengthen. As sellers complete those activities, further assessments can help establish whether their proficiency is improving and where additional support may be required.
The results can then inform subsequent assessments and development decisions, allowing priorities to evolve as new needs emerge or existing ones are addressed.
Of course, the reliability of this process depends on the quality of the standards and assessment methods. Automated scoring, for instance, is only as useful as the criteria and information supporting it. We still need representative observations, human review, and appropriate data governance. And we must continue to examine whether improved proficiency translates into better execution in real customer conversations.
What we’re moving towards is a system built around two connected elements:
- The foundation: Role-specific capability standards that define what sellers need to know and demonstrate, informed by business requirements and updated as those requirements change.
- The continuous loop: Monitor execution and proficiency → flag potential issues → validate development needs → respond with appropriate interventions → reassess → feed new findings back into monitoring.
Technology can help teams collect evidence more frequently, assess capability at scale, and provide targeted development more quickly. But it cannot, on its own, fully tell us why performance is falling short or whether training is the right response. Those decisions still require human judgement.
And when a significant business change or a complex performance problem calls for a more comprehensive investigation, the seven-step TNA framework remains relevant. Its findings can also inform future capability expectations and development priorities.
In this way, we can move beyond treating training needs analysis solely as a periodic exercise and towards an ongoing system for identifying, validating, and addressing sales capability development needs.

Turn skill gaps into better sales performance
Conclusion
As I was working through this framework, I found myself thinking about how much work we’re doing before we’ve even started designing a training programme.
And then I realised that’s precisely the point.
We’re often eager to get to the solution. We want to build the course, launch the programme, and give sellers something that will help them perform better. But if we haven’t properly understood what’s preventing effective execution, how confident can we be that what we’re building will make a difference?
A substantial part of the effort should go into understanding the problem before deciding how to solve it.
That means being clear about the business outcome we’re trying to influence, establishing what effective execution requires, and examining where sellers are struggling. It also means being willing to challenge our initial assumptions, including whether the issue can actually be addressed through training.
Of course, the depth of analysis should be proportionate to the problem. Not every development need requires an exhaustive investigation, particularly when we already have reliable capability standards and assessment data to work with.
And as we’ve explored, technology increasingly allows us to make parts of this process more continuous, helping us identify potential gaps, respond to validated needs, and reassess proficiency over time.
The value of a sales training needs analysis lies in the quality of the decisions it helps us make. Sometimes that will mean designing a targeted development programme. Other times, it will mean recommending a change to the sales process, addressing a management issue, or recognising that training isn’t the answer.
Our ultimate goal should be making sure we’re addressing the right problems, with the right interventions, for the right reasons.
